Publicité
All manuals and user guides at all-guides.com
▶ Secure the workpiece to a stable support. Never hold the piece being cut in your hands or across your
leg.
▶ Switch the product on only after bringing it into the working position.
▶ Always guide the power tool away from your body when working with it.
▶ Apply only moderate pressure and cut at an appropriate speed, especially when cutting large-diameter
pipes. This will help to prevent the power tool overheating.
▶ Before cutting through pipes, make sure that the pipes are empty, i.e. that they do not contain liquids.
Drain the pipes if necessary.
▶ When cutting through pipes, hold the power tool above the level of the pipe you are cutting through.
◁ The power tool incorporates no protective measures to prevent ingress of water or moisture. Liquids
running out of pipes may cause a short circuit in the power tool.
▶ Never cut into unknown materials and keep the line of cut above and below the workpiece free of
obstacles.
◁ If the saw blade strikes an object it may cause the power tool to kick back.
▶ Wear protective gloves also when changing the accessory tool. Touching the accessory tool presents a
risk of injury (cuts or burns).
▶ Always remove the battery when the power tool is not in use, before maintenance, before changing
accessory tools and before transport.
▶ Engage the transport lock before storing or transporting the power tool.
▶ Observe the manufacturer's instructions regarding the handling and storage of saw blades.
2.4
Battery use and care
▶ Observe the special regulations and instructions applicable to the transport, storage and use of Li-ion
batteries.
▶ Do not expose batteries to high temperatures, direct sunlight or fire.
▶ Do not disassemble, crush or incinerate batteries and do not subject them to temperatures over 80 °C.
▶ Do not use or charge batteries that have suffered mechanical impact, have been dropped from a height
or show signs of damage. In this case, always contact your Hilti Service.
▶ If the battery is too hot to touch it may be defective. In this case, place the product in a non-flammable
location, well away from flammable materials, where it can be kept under observation and allowed to
cool down. In this case, always contact your Hilti Service.
3
Description
3.1
Product overview
3.2
Intended use
The product described is a cordless reciprocating saw. It is designed for cutting wood, wood-like materials,
metals and plastics.
The product is designed for two-handed operation.
▶ Use only Hilti Liion batteries of the B 22 series with this product.
▶ Use only Hilti battery chargers of the C4/36 series for charging these batteries.
14
English
Printed: 23.03.2018 | Doc-Nr: PUB / 5408534 / 000 / 01
1
Chuck (blade holder)
@
Control switch
;
Transport lock
=
Grip
%
Battery state of charge indicator
&
Battery release button
(
Battery
)
Rating plate
+
Front gripping area (hand guard)
§
AVR contact shoe
/
Saw blade
:
2200411
*2200411*
Publicité
