Hoist Fitness LeMond pilot II Manuel D'instructions page 7

INSTALLATION OF PILOT
The Pilot II can only be installed on a LeMond
The console uses three(3) AAA batteries and the transmit-
ter uses two(2) AA batteries as a source of power. Install the
supplied batteries in the console and in the transmitter prior
to using.
To install the meter (console and the transmitter), you will
need
the following tools:
Phillips Screwdriver
2.5-mm Hex Key (supplied)
3-mm Hex Key (supplied)
4-mm Hex Key (supplied)
NOTE:
RevMaster Pro bike.
Page 7