Hoist Fitness LeMond pilot II Manuel D'instructions page 25

Pairing the Console and the Cadence Transmitter
The Cadence Transmitter and the Console communicate via an
ANT+ signal. They will be paired from the factory, but should they
lose connection, follow the steps below to reestablish the pairing.
Pairing the Cadence Transmitter (see diagram on p. 27 )
1. With the console ON. Press the [∧] + [∨] + [CA-
DENCE] buttons simultaneously.
2. Start pedaling.
3. When "0000" or another 4 numbers appears in the
lower left window, press [START] and the console will
search for the cadence signal. "Searching" will be indi-
cated by blinking lights in the lower left window.
4. When the console detects the cadence transmitter then
the blinking lights will hold a solid 4 digit number to
indicate the pair has been made, and your cadence will
appear in the upper left window.
5. Press [STOP] to return to main screen.
APPENDIX
Page 25