Hoist Fitness LeMond pilot II Manuel D'instructions page 26

Pairing to an ANT+ HR strap (see diagram on p.27)
Note: HR signal detection is based on proximity; meaning
whichever HR strap is the closest to the console is the signal that
the console will display. If the console has trouble detecting your
ANT+ HR strap, follow the steps below. This is only for ANT+ HR
straps. 5K Analog and digital straps will be detected by proxim-
ity, not by pairing.
1. While wearing the ANT+ HR strap and with the con-
sole ON. Press the [∧] + [∨] + [HR] buttons simulta-
neously.
2. When "0000" or another 4 numbers appears in the
lower right window, press [START] and the console
will search for the HR signal. "Searching" will be indi-
cated by blinking lights in the lower right window.
3. When the console detects the HR signal then the
blinking lights will hold a solid 4 digit number to indi-
cate the pair has been made, and your HR will appear
in the middle window.
4. Press [STOP] to return to main screen.
Page 26
APPENDIX