Publicité
HDD
HDD settings of the cameras
Click on the "Advanced" submenu
Mode: Storage
Camera
Selection of the camera channel for processing.
Used Record Capacity
File size of a recording file
HDD capacity (GB)
HDD capacity (in GB)
Max. capacity (GB) for recordings
Specify the maximum recording size on the hard
disk drive for each camera.
1. Select Copy if the setting is to be applied for all cam-
eras.
2. Confirm the settings by clicking Apply and exit the
menu with OK.
3. Click Apply and confirm the restart in the next win-
dow with OK.
S.M.A.R.T.
S.M.A.R.T. means Self-Monitoring Analysis and Report-
ing Technology. Click on the "S.M.A.R.T" submenu.
All manuals and user guides at all-guides.com
This information helps to recognise hard disc errors. For
this reason, do not deactivate this feature if possible.
HDD
Self-test status
Self-test type
S.M.A.R.T
Temperature (°C)
Switching on
(Days)
Self-evaluation
Complete evalua-
tion
Confirm the settings by clicking Apply and exit the menu
with OK.
Checking the HDD status
The status of each HDD can be checked in the "Mainte-
nance" menu. S.M.A.R.T. information (Self-Monitoring,
Analysis and Reporting Technology) is stored in the log
data.
Selection of the hard disk drive to
be processed.
Shows the status of the current self-
test
Select the type of the self-test.
Short Test / Expanded Test /
Transport Test
Click on the icon to start the self-
test
Display the HDD temperature
Display the operating days of the
hard disk drive
Status display of the self-evaluation
Status display of the evaluation
Important:
If only one HDD is installed and this is set to
"Read-only", then the device cannot make re-
cordings.
Call up the log file and search according to the infor-
mation/S.M.A.R.T. HDD (see page Fehler!
Textmarke nicht definiert.).
You can specify alarms to inform you of HDD errors.
To do this, call "Warning" in the "Settings" menu.
98
Publicité
