Publicité
OPERATION HZI910
Display HZI910
The product allows remote display of transfer system positions, sources availability and
operational mode. Programming and operations remain available directly on master product
(automatic changeover switches or controller).
1 Power On
2 Source 1 available
3 Transfer system in position 1
4 Transfer system in position 0
5 Transfer system in Automatic mode
6 • Product faulty, transfer error
• Possible to reset after error disappearance
the power supplies of the master product for
3 minutes
7 Source 2 available
8 Transfer system in position 2
OPERATION HZI911
Display HZI911
The product allows remote display of transfer system positions, sources availability, operational
mode and metering. Programming and operations (Test and Control) are also available. Master
product (automatic changeover switches or controller) display deactivated as soon as the
remote interface is connected.
1 Power On
2 Source 1 available
3 Transfer system in position 1
4 Transfer system in position 0
5 Transfer system in Automatic mode
6 • Product faulty, transfer error
• Possible to reset after error disappearance
the power supplies of the master product
for 3 minutes
7 Source 2 available
8 Transfer system in position 2
9 Manual mode active
: Padlock
; Control mode active
< Test mode active
= Programming mode active
30
1
2
3
4
5
9
:
6
1
2
7
3
8
4
5
=
;
<
OPERATION HZI911
Display HZI911
A Priority source
B Phases (wires) displayed
C Units
D Informations
• source 1
• source 2
6
• sources 1 & 2 (split screen)
E Power factor Capacitive or inductive
7
F Signed values (power)
G Values
8
Keypad
H Access to AUT, Test, Control and Prog modes
I Direct Access to Test and Control
functionalities or navigation
J Allows main menu access in visualisation
mode or validation
Software version
Software version of the master product is
displayed immediately after master product
power on.
31
A
B
C
D
E
F
G
H
J
I
Publicité
