Siemens SCALANCE X-300 V4.1.8 Manuel De Configuration page 410

Annexe D
D.1 Messages d'erreur du SCALANCE X300 / X400
Messages d'information sur les évènements survenus
Les messages ci-après servent à informer sur les évènements qui ne sont pas directement liés à
l'état d'erreur (LED Fault) :
• User entry: <entrée utilisateur>
• Unknown command <commande> for <nom du protocole> protocol received.
• Device is configured to ring <off | ARD | client HRP | client MRP | gestionnaire HRP |
gestionnaire MRP>.
• Standby function <Master | Slave>.
• Observer started.
• Observer stopped.
• Observer contacted Redundancy Manager <adresse MAC>.
• Standby is waiting for <partner | observer>.
• Standby <partner | observer> connected to <master | slave> <adresse MAC> <numéro de
port>.
• Standby <partner | observer> lost connection to <master | slave> <adresse MAC> <numéro
de port>.
• Port <numéro de port> is isolated ring port.
• Port <numéro de port> is static ring port.
• No SMTP connection to mail server.
Server IP address <adresse IP> TCP port <numéro de port TCP>.
• No SMTP application found.
Server IP address <adresse IP> TCP port <numéro de port TCP>.
• SMTP (E-Mail) connection aborted. Server IP address <adresse IP>.
• Unable to send message to syslog server. Please check syslog socket configuration.
• Connected to syslog server.
• SNMP: Authentification failure.
• R)STP: new root bridge detected.
• (R)STP: topology change detected.
• Unable to send E-Mail(s). Please check IP configuration.
• Unable to send trap(s). Please check IP configuration.
• Failure reply code <code d'erreur> from SMTP server.
• Restart requested.
• No C-PLUG found. Internal flash memory used.
• An empty C-PLUG was found.
• C-PLUG format request.
• A filled C-PLUG was found.
• A corrupted C-PLUG was found.
410
SCALANCE X-300/X408-2 V4.1.8 / SCALANCE X414-3E V3.10.2
Manuel de configuration, 07/2024, C79000-G8977-C187-35