Publicité
Wood floor installation:
Concrete floor Installation:
CAUTION
Check the bracket: After installing the bracket, try using light force to tip the unit. If the
unit does not tip, then the brackets are mounted securely. If the unit does tip, the bracket
must be reinstalled according to these instructions.
Dacor_BRW5500D_IM_EN.indd 31
A
D
C
B
E
A
D
C
B
F
Ø8
1. After you have chosen the installation
location, place the bracket on the wood
floor and use screws (E) (2pcs) to align
Loc C and secure the bracket into the
wood floor.
2. Move the unit to align Loc E with
bracket Loc A and secure with the bolt
(B), lock washer (C) and flat washer (D).
1. After you have chosen the installation
location, choose any hole in Loc D to
secure the bracket into the concrete
floor.
2. Using a concrete bit, drill an 3/8"
(8 mm) pilot hole 1.7"-2" (45-55 mm)
deep. Remove the nut, spring washer
and washer for the expansion screw.
3. Carefully tap the expansion screw into
the concrete using a hammer or mallet.
4. Align Loc D and secure the nut, spring
washer and washer tightly back onto
the expansion screw and affix it to the
concrete floor.
5. Move the unit to align Loc E to bracket
Loc A and secure with the bolt (B), lock
washer (C) and flat washer (D).
English 31
2024-06-13
4:31:41
Publicité
