Publicité
Installation Specifications for Built-in Purposes
24" min. (61.0 cm)
67" max. (170 cm)
24" min.
(61.0 cm)
47" max. (120 cm)
2" (5.1 cm)
6" (15.2 cm)
90°
1 1/2" (3.8 cm) diameter
* If electrical outlet in
adjacent cabinetry
Preparing the enclosure
Gloves and safety goggles should be worn during installation.
It is not recommended to install the appliance into a corner or directly beside a wall.
The door will need to be opened more than 90° to allow full extension of the shelves.
If it is necessary to place the unit next to a wall or in a corner, leave at least 4 inches
(10 cm) of space between the wall and the appliance to allow for the door opening.
The cabinet opening must be at least 24 inches (61 cm) wide by 34.3 inches (87 cm) high
by 24 inches (61 cm) deep.
NOTE
The listed depth requirement is assuming that the electrical outlet is located in the
adjacent cabinetry or flush mounted in the rear wall, not surface mounted inside the
enclosure.
If the electrical outlet is located inside adjacent cabinetry, cut a 1.5 inch (3.8 cm) diameter
hole to admit the power cord. If the cabinet wall is metal, the hole edge must be covered
with a bushing or grommet.
If the electrical outlet is in the same opening as the rear wall, a 1 11/16inch (43 cm)
gap is needed. The minimum depth of the opening is 643mm.
English 19
Dacor_BRW5500D_IM_EN.indd 19
2024-06-13
4:31:38
Publicité
