Publicité
GRINDING
1
Attach the grinding
guard 1
to the tool
and align it, so that the operator is pro-
tected from sparking.
Caution! Make sure the tool is
switched off and unplugged.
DEPRESSED GRINDING WHEEL
3
Install the wheel with its raised centre
facing the machine. Install the outer
flange
4
with the smaller side facing
the grinding wheel.
CUTTING
1
Attach the cutting guard
2
to the tool
and align it, so that the operator is pro-
tected from sparking.
Caution! Make sure the tool is
switched off and unplugged.
CUTTING WHEEL
3A
Install the cutting wheel. Install the out-
er flange
4
with the larger side facing
the cutting wheel.
Tighten the outer flange with the
wrench, while pressing the spindle lock
button 10.
ROTATE HANDLE
1
Press the rotate handle button to re-
lease the rear end of the handle.
124
EN
2
Close the guard release lever. Securely
tighten the grinding guard
1
with the
wrench.
Tighten the outer flange with the
wrench, while pressing the spindle lock
button 10.
2
Close the guard release lever. Securely
tighten the cutting guard
2
with the
wrench.
DEPRESSED CUTTING WHEEL
3B
Install the wheel with its raised centre
pointing towards the machine. Install
the outer flange
4
with the larger side
facing the cutting wheel. Tighten the
outer flange with the wrench, while
pressing the spindle lock button 10.
2
Turn the handle 90° to the desired po-
sition, so that the two arrows point at
each other.
Caution! Make sure the handle is
securly locked in place.
1. 1.
1
2. 2.
3
1. 1.
1
2. 2.
3A
3a
1
2
1. 1.
2. 2.
2
1. 1.
2. 2.
3B
2
EN
125
Publicité
