Publicité
Complete
the Installation
1.
Lock the front casters.
NOTE:
Locking
the casters will help prevent the refrigerator
from
moving
while it is being lifted.
2.
Insert a small piece of cardboard
between
the caster brake and
the floor. This will keep the brake from rubbing
on the floor.
3,
4.
5,
6.
Stand the refrigerator
upright.
Replace the base grille by placing
the metal clips in the openings
in the metal panel and rolling the grille downward
until it snaps
into place.
Unlock
the casters
and move the refrigerator
into its final
location.
Lock the casters.
REFRIGERATOR USE
LS ng
Contuse s
The temperature
controls
are located
at the top front of the
refrigerator
or freezer compartments.
Temperature Controls
For your convenience, the temperature control is preset at the
factory. When you first install your refrigerator, make sure the control
is still set to the recommended setting as shown.
Recommended
Setting "3 Snowflakes"
IMPORTANT:
•
The recommended
setting
should
be correct
for normal
household
refrigerator
use. The controls
are set correctly
when
milk or juice is as cold as you like and when ice cream is firm.
•
Wait 24 hours for your refrigerator
to cool completely
before
adding food.
If you add food before the refrigerator
has cooled
completely,
your food
may spoil.
NOTE: Adjusting
the refrigerator
and freezer temperature
controls
to a colder than recommended
setting
will not cool the
compartments
any faster.
•
If the temperature
is too warm or too cold in the refrigerator
or
freezer, first check the air vents to be sure they are not blocked
before adjusting
the controls.
Adjusting Controls
If you need to adjust the temperature
in either the refrigerator
or
freezer compartment,
use the settings
listed in the chart below as a
guide.
•
Move the dial to the desired number
of snowflakes
from (1 least
cold to 5 coldest).
NOTE:
Except when starting the refrigerator,
do not adjust either
control
more than one setting
at a time. Wait 24 hours between
adjustments
for the temperature
to stabilize.
CONDITION/REASON:
ADJUSTMENT:
REFRIGERATOR
too warm
REFRIGERATOR
Control
one setting
higher
FREEZER too warm/too
little ice
FREEZER Control
one
setting
higher
REFRIGERATOR
too cold
REFRIGERATOR
Control
one setting
lower
FREEZER too cold
FREEZER Control
one
setting
lower
Cooling
Off/On
Move the dial control
to the word OFF. To turn cooling
back on, move
the dial control to the desired temperature
setting.
NOTE:
Neither compartment
will cool when the control is set to OFR
REFRIGERATOR F EATURES
Your model may have some or all of these features.
important
information
to know
about
glass
shelves
and covers:
Do not clean glass shelves
or covers
with warm water
when
they are cold. Shelves
and covers
may break
if exposed
to
sudden
temperature
changes
or impact,
such as bumping.
Tempered
glass
is designed
to shatter
into many small,
pebble-size
pieces.
This is normal.
Glass shelves
and covers
are heavy.
Use both
hands
when removing
them
to avoid
dropping.
The shelves in your refrigerator
are adjustable
to match your
individual
storage
needs.
Storing
similar food items together
in your refrigerator
and adjusting
the shelves to fit different
heights
of items will make it easier to find
the exact item you want. It will also reduce the amount
of time the
refrigerator
door is open, and save energy.
Shelves and Glass Shelves (on some models)
To remove and replace a shelf:
1. Remove items from the shelf.
2. Slide the shelf straight out to the stop.
3. Depending on your model, lift back or front of the shelf past the
stop. Slide shelf out the rest of the way.
4. Replace the shelf by sliding the back of the shelf into the track in
the wall of the cabinet.
Publicité
