Publicité
CONNECTION AND PREPARATION
Connecting the power cord
Notes:
Check that the mains voltage on the type
7
plate (on the bottom of the hi-fi system)
corresponds to your local mains supply. If
this is not the case, contact your specialist
dealer.
All the other devices/loudspeakers must be
7
connected before you connect the power
cord.
1
Insert the power cord into the
on the hi-fi system.
2
Plug the power cord into the wall socket.
Caution:
The hi-fi system is connected to the mains
7
with the power cord. Pull out the power
plug if you want to completely disconnect
the hi-fi system from the mains.
Make sure the power plug is easily acces-
7
sible during operation and not hindered by
other objects.
All manuals and user guides at all-guides.com
»AC ~
« socket
Activating the battery in the
remote control
1
Pull off the film from the battery.
Changing the remote control
battery
1
Undo the battery compartment screws
2
Pull out the battery compartment
3
Insert the battery (3 V, lithium, type CR 2025)
making sure that the positive terminal (+) is
facing upwards.
4
Push in the battery compartment.
5
Tighten the battery compartment screws.
Notes:
Do not expose the batteries to extreme
7
heat, caused for example by direct sunlight,
heaters or fire.
Remove the batteries when they are flat
7
or when you know that the hi-fi system will
not be used for a long period of time. The
manufacturer accepts no liability for dam-
age caused by leaking batteries.
Environmental note:
Batteries, including those which do not con-
7
tain heavy metal, should not be disposed
of with household waste. Always dispose
of used batteries in accordance with local
environmental regulations.
---------------------------------------
25
ENGLISH
Publicité
