Calculated Industries SCALE MASTER CLASSIC 6020 Guide De L'utilisateur page 9

1.800.561.8187
Locking Modes, Scales and Units
Your Scale Master Classic comes equipped
with a lock switch that prevents inadvertently
changing drawing scales. When the lock is
activated, a lock symbol will be displayed in the
LCD. While active, the Mode, Scale and Units
cannot be revised.
Turning the Clicker & Beep On/Off
To toggle the rolling click off or on, press
[RESET] [SCALE]
+ . This will also toggle the
" COUNT " and error/notification beep off or on.
Using the Custom Scale/Ruler
The default value (after a Clear All/Software
Reset) for Custom Scale is one-to-one (e.g.,
1 inch equals 1 inch). This lets you use your
Scale Master Classic as a rolling ruler, which is
especially useful for measuring irregular shapes.
1) To reset your Custom Scale setting to a one-
[RESET]
to-one ratio, press +
COUNT]
to perform a Clear All.
[MODE]
2) Then press the key until the
" " mode appears.
CUSTOM
3) Begin rolling.
Memory Function Keystrokes
[RCL] [M1+]
Displays the value stored in the
M1+
[RCL] [M2x]
Displays the value stored in the
M2x
www. .com
[SUBTRACT/
memory register.
memory register.
7 – User's Guide
information@itm.com