Calculated Industries SCALE MASTER CLASSIC 6020 Guide De L'utilisateur page 13

1.800.561.8187
6) Press:
[M1+]
to increment the selected digit,
[SUBTRACT/COUNT]
to decrement,
[SCALE]
to advance to next digit,
[MODE]
to move back one digit,
[SCALE]
7) Continue to press until all digits
are set and display returns to zero. The scale
is now stored.
[RCL] [SCALE]
Press while in custom mode to
display the current custom scale.
Setting a Height
The height function is used to enter a height
value for finding volume.
[SUBTRACT/COUNT]
1) Press
annunciator will begin flashing "
U.S. mode or " " for Metric mode.
M
2) If you do not want to change the units, go
to step 3. To change the units, press
until you reach the desired unit.
[SCALE]
3) Press
to begin setting the digits.
The left-most digit will begin flashing.
Press:
[M1+]
to increment the selected digit,
[SUBTRACT/COUNT]
to decrement,
[SCALE]
to advance to next digit,
[MODE]
to move back one digit.
[SCALE]
4) Continue pressing
are set and the display returns to zero. The
height is now stored.
Note: Once you set your height, you do not need to
enter it again unless you want to change it.
www. .com
[M2x]
+ . The
" for
FT IN
[M1+]
until all digits
11 – User's Guide
information@itm.com