Calculated Industries SCALE MASTER CLASSIC 6020 Guide De L'utilisateur page 14

1.800.561.8187
Finding Area and Volume
Finding Area
[M1+]
1) Roll the first side and press
" " will appear in the scale box display and
M
the main display will be cleared.
2) Roll the second side and press
main display will be cleared.
[RCL] [M2x]
3) Press . This displays the linear
value stored in this register. The second
[M2x]
press of will calculate and display the
area, which is the value stored in
multiplied by the value stored in
Finding Volume
[M1+]
1) Roll the first side and press
2) Roll the second side and press
3) Set a Height value (see "Setting a Height").
[RCL] [M2x]
4) Press . This displays the linear
value stored in this register. Press
second time to calculate and display the
[M2x]
area. Press the key again to find
[M2x]
volume. Press a fourth time to
display the stored height value.
A
PPENDIX
Error/Auto-Range Function
[RESET]
Error Message – Press to clear.
Auto Range Function – When rolling or calculating
large numbers, your answer will be displayed in
the next largest measurement unit (ex: 10,000 M
will display instead of 10,000,000 MM ).
12 – Scale Master Classic
®
www. .com
. A small
[M2x]
. The
[M1+]
[M2x]
.
.
[M2x]
.
[M2x]
a
information@itm.com