Calculated Industries SCALE MASTER CLASSIC 6020 Guide De L'utilisateur page 10

1.800.561.8187
(Cont'd)
[RESET] + [M1+]
Clears the value stored in the memory register.
M1+
[RESET] + [M2x]
Clears the value stored in the memory register.
M2x
[RESET] + [RCL]
Clears values stored in memory
M1+
Converting Between Scales
The Scale Master Classic can automatically
convert values between scales. For example, 20
"
feet rolled in 1/16 scale will be converted to
"
10 feet in 1/8 scale. You may want to roll a
value in one scale and then add that exact value
(unconverted) to a value rolled in another scale.
[M1+]
1) Roll a value and press
[SCALE]
to change scales.
2) Roll another value and press
[RCL] [M1+]
3) Press to recall the combined total.
Using the Counter
[SUBTRACT/COUNT]
You can use the
count items such as electrical outlets, drains, etc.
[MODE]
Press until you find the "
[SUBTRACT/COUNT]
mode. Then press the
key to count the items.
[M1+] [M2x]
You can use the and
keys to store or accumulate the counts for two
different items. After you have a count value,
[M1+] [M2x]
press or to store it.
8 – Scale Master Classic
®
www. .com
and .
M2x
. Press
[M1+]
.
key to
"
COUNT
memory
information@itm.com