FREEZER FEATURES
Your model may have some or all of these features.
To Remove and Replace Wire Baskets:
Upper basket
1. Remove all items from basket. Remove basket by pulling
basket out to its full extension and lift out.
2. Replace basket by sliding into upper molded railing. Make
sure that rear of basket hooks behind rail catch.
Upper basket divider
•
The upper basket divider separates ice making from frozen
food storage and it prevents ice from falling behind the
basket assemblies.
•
The upper basket divider is designed to be non-removable
and should remain in the basket.
Lower basket
1. Remove all items from basket. Remove the basket by lifting it
from the rail guides.
2. Replace the basket by placing into rail guides.
Lower basket
divider
The lower basket divider is designed to be non-removable
and it
should remain in the basket.
A
To Remove
and Replace the Bins:
1. Remove the bin by lifting it up and pulling it straight out.
2. Replace the bin by sliding it in above the desired support and
pushing it down until it stops.
To Remove
and Replace the Utility Compartment:
1. Remove the utility compartment
by lifting it up and pulling it
straight out.
2. Replace the utility compartment
by sliding it in above the
desired support and pushing it down until it stops.
1/
I/
ti
1;
J
REFRIGERATOR CARE
A. Divider
DOOR FEATURES
Your model may have some or all of these features.
(
:
To Remove and Replace the Door Retainer:
1. Remove the retainer by lifting it up and pulling it straight out.
2. Replace the retainer by sliding it in above the support and
pushing it down until it stops.
ExpBosion Hazard
Use nonfBammabme cleaner.
Failure to do so can resumt in death, expmosion, or fire.
Both the refrigerator and freezer sections defrost automatically.
However, clean both sections about once a month to prevent
odors from building up. Wipe up spills immediately.
To Clean Your Refrigerator:
1. Unplug refrigerator or disconnect
power.
2. Remove all removable parts from inside, such as shelves,
crispers, etc.
3. Hand wash, rinse, and dry removable parts and interior
surfaces thoroughly.
Use a clean sponge or soft cloth and a
mild detergent in warm water.
16