KitchenAid KBFN502ESS Guide De Démarrage Rapide

Built-in Bottom Mount Dispening Quick Start Guide
OPERATING INSTRUCTIONS
IMPORTANT: Before operating this appliance, make sure it has been properly installed according to the
appliance's Installation Guide.
For your convenience, your refrigerator and freezer temperature controls are set to the recommended set
points at the factory. When you first install your refrigerator, make sure the temperature controls are still set
to the recommended set points. The recommended set points are 37°F (3°C) for the refrigerator and 0°F
(-18°C) for the freezer.
IMPORTANT:
� The recommended settings should be correct for normal household refrigerator use. The controls
are set correctly when milk or juice is as cold as you like and when ice cream is firm.
� When the power is on, the temperature display shows the set point temperature of the compartment.
� Wait 24 hours for your refrigerator to cool completely before adding food. If you add food before the
refrigerator has cooled completely, your food may spoil.
NOTE: Adjusting the refrigerator and freezer controls to a colder than recommended setting will not
cool the compartments any faster.
� If the temperature is too warm or too cold in the refrigerator or freezer, first check the air vents to be
sure they are not blocked before adjusting the controls.
� Wait at least 24 hours between adjustments. Recheck the temperatures before other adjustments
are made.
Viewing the Temperature in Degrees Celsius
� Press C touch pad to display degree Celsius, press F touch pad to display
degree Fahrenheit.
NOTE: If the freezer temperature is below zero, the negative sign next to the
freezer display will light up. This is normal.
Adjusting Temperatures
Pressing the Freezer or Fridge picture button once will display the compartment temperature.
Press + or - to adjust temperature. Press Save to set the temperature.
The Refrigerator temperature range will be from 34°F to 42°F (1°C to 6°C), with the factory default
temperature being 37°F (3°C).
The Freezer temperature range will be from -5°F to 3°F ( -21°C to -16°C), with the factory default
temperature being 0°F (-18.0°C).
CONDITION/REASON:
REFRIGERATOR too cold
REFRIGERATOR too warm
FREEZER too cold
FREEZER too warm/too little ice
Water Filter Indicator and Reset
The water filter indicator, located on the control panel, will help you know when to change the water filter.
A replacement water filter should be ordered when "Order" is displayed. It is recommended that you
replace the filter when "Replace" is displayed or when water flow to your water dispenser and/or ice maker
decreases noticeably. See "Changing the Water Filter" later in this section.
After changing the water filter, press and hold FILTER RESET for 3 seconds until the "Order Filter" or
"Replace Filter" indicator light disappears.
Filter Reset
After changing the filter, press and hold Filter Reset button for 3 seconds. The display will count down
3,2,1, the filter reset will flash and return to the original display.
See the "Water Filtration System" section in Owner's Manual for steps to remove and replace filter.
W11594073A
W11594074A-SP
TEMPERATURE ADJUSTMENT
REFRIGERATOR Control 1° higher
REFRIGERATOR Control 1° lower
FREEZER Control1° higher
FREEZER Control 1° lower
Max Cool/ Max Ice
Max Cool
The Max Cool feature assists with full grocery loads, temporarily warm room
temperatures, or during heavy door opening use.
� Press OPTIONS, and then press MAX COOL to turn on the Max Cool feature. Max
Cool will remain activated for 24 hours unless manually turned off.
NOTE: The temperature display for the refrigerator compartment will remain at the
user's set point, but the actual temperature of the refrigerator compartment will drop to
34°F (1°C), while the Max Cool feature is enabled. After 24 hours, the refrigerator
returns to the previous temperature set points.
Max Ice
The Max Ice feature speeds up the ice production rate to assist with periods of heavy ice usage.
� Press OPTIONS, and then press MAX ICE to turn on the Max Ice feature. Max Ice will remain activated
for 24 hours unless manually turned off.
NOTE: The temperature display for the refrigerator and freezer compartments will remain at the user's
set points, but the actual temperature of the freezer compartment will drop to -5°F (-21°C), while the
Max Ice feature is enabled. After 24 hours, the freezer will return to the previous temperature set point.
Alarm Functions
Door Open - An alarm will sound when a door has been open for longer than 5 minutes. Closing the door
or drawer, or pressing any Home Screen touch pad (Fridge, Freezer or Options) will reset the Door Open
feature and turn off the audio alarm.
NOTE: If the door(s) or drawer are left open for 10 minutes the interior lights will go out. Closing the open
door(s) or drawer will reset the lights.
Over Temperature
IMPORTANT: If the Over Temperature Alarm activates, your food may spoil. See "Power Interruptions."
Minimize door openings until temperatures return to normal.
The Over Temperature feature is designed to let you know when either the refrigerator temperature rises
above 48°F (9°C) or the freezer temperature rises above 15°F (-9°C) for longer than 1½ hours. The audio
alarm will shut off automatically when the temperature returns to normal, but the indicator light will continue
to flash to let you know that an Over Temperature condition occurred until an Over Temperature reset has
been performed. Press any Home Screen touch pad (Fridge, Freezer or Options) to turn off the indicator
light.
If the over temperature condition is still present when an Over Temperature reset is performed, the
indicator light will continue to reactivate every 1½ hours until refrigerator and freezer temperatures are
below 48°F (9°C) and 15°F (-9°C), respectively.
Power Outage - When a power outage occurs, a Power Outage indicator light will be displayed. Press any
Home Screen touch pad (Fridge, Freezer or Options) to turn off the indicator light. The power outage
indicator light will not display when either Cooling Off or Sabbath mode is active, but will appear after
exiting Sabbath mode if a power outage occurred.
Sabbath Mode
Sabbath mode is designed for those whose religious observances require turning off the lights and ice
maker. By selecting this feature, the temperature set points remain unchanged, the ice maker will be
disabled, the interior lights will turn off, and the audio tones are muted. For most efficient refrigerator
operation, it is recommended to exit Sabbath mode when it is no longer required.
� Press and hold the SABBATH touch pad to turn on Sabbath mode. The display will count down 3,2,1.
This feature will remain on until Sabbath is deactivated. Press and hold Sabbath for three seconds until
Sabbath mode is turned off. The display will not show a countdown to turn off.
NOTE: If the Max Cool or Max Ice feature has been selected prior to turning on Sabbath mode, Max
Cool and Max Ice will be automatically canceled upon entering Sabbath mode.
Online Ordering Information
For detailed installation instruction and maintenance information, winter storage, and transportation tips,
please see the Owner's Manual included with your appliance.
For information on any of the following items, the full cycle guide, warranty, detailed product dimensions, or
for complete instructions for use and installation, please visit
https://www.kitchenaid.com/service-and-support, or in Canada
https://www.kitchenaid.ca/service-and-support. This may save you the cost of a service call. However, if
you need to contact us, use the information listed below for the appropriate region.
United States:
1–800–253–1301
KtichenAid Brand Home Appliances
Customer eXperience Center
553 Benson Road
Benton Harbor, MI 49022–2692
SAVE THESE INSTRUCTIONS
Canada:
1–800–807–6777
KitchenAid Brand Home Appliances
Customer eXperience Centre
200–6750 Century Ave.
Mississauga, Ontario L5N 0B7