Publicité
Fig.2a
4.3.2- Handle assembly
1. Secure the lower handle tube (5) to their support located on the mower rear body (Fig.3a)
2. Secure with the provided screws.
3. Assemble the upper handle tubes (1) on lower handle tubes (5) (Fig,3b).
4. Secure with the knobs (4) (Fig.3c)
Fig.3a
4.3.3- Grass collection box
Note: The grass collection box must be fitted to the mower before operation.
Insert the grass box (11) to the rear side of the mower as shown in Fig.4a & 4b.
Fig.4a
4.4- Setting the cutting height (Fig.5)
Warning: Before adjusting the cutting height, make sure
- to switch off the mower
- to check that the blade has completely stopped rotating.
- to switch off the safety switch.
Push the lever (11) and set it on one of the four positions.
4 cutting heights : 28mm, 40mm, 52mm and 64mm.
4.5- Battery
Before using the lawnmower for the first time, charge the battery for approx. 5hours.
Refer to chapter 6 regarding instructions and precautions related to the battery and its charging.
All manuals and user guides at all-guides.com
Fig.2b
Fig.3b
Fig.2c
Fig.3c
Fig.4b
Fig.5
Publicité
