Publicité
All manuals and user guides at all-guides.com
15. If the machine bumps against a foreign object, examine the unit for any sign of damage and make
the necessary repairs before using the unit again.
16. Never use the lawnmower with defective blade guards or without the security features in place.
17. If the unit starts to vibrate abnormally, stop the engine immediately and check the reason.
Vibration is generally a sign of trouble.
18. Keep in mind that the lawnmower can, unexpectedly, kickback or make a leap forward if the
blade hits on hard ground, frozen ground, or obstacles such as stones, roots ...
19. Do not put hands, feet or any part of the body or clothing near the rotating blade. Warning! Risk
of injury!
20. It is forbidden to remove or modify electrical and mechanical safety features.
21. Never use the lawnmower when it rains. Avoid getting the lawnmower wet and do not expose it to
moisture. Do not leave the lawnmower outside overnight. Do not cut wet grass.
22. Protection against overload.
The unit is equipped with an overload protection fuse. In the case where the machine is blocked by a
foreign body, the connection between the engine and the transmission shaft of the blade will cut off
automatically. If this occurs:
- Stop the engine,
- Solve the cause of the blockage. Replace the blade (if necessary) before restarting.
23. Switch OFF the safety switch
- Whenever you leave the mower
- Before cleaning a blockage
- Before checking, cleaning or any verification, maintenance on the machine
- After striking a foreign object. Check the machine for any damage and perform repairs if necessary.
- If the machine starts vibrating abnormally (check immediately).
Warning! The blade does not stop immediately after engine shutdown. Wait until the blade stops
before making an intervention.
24. WARNING
- Do not assume of your knowledge of the mower.
Remember that a split second of negligence is sufficient to cause serious damage.
3.3- In the event of emergency
Stop immediately the engine.
Assist the injured person with first aid and call for medical assistance as quickly as possible.
IV- GETTING STARTED
4.1- Unpacking
- Remove product from its packaging.
- Check that tool and accessories are not damage
4.2- Presentation
The machine is delivered pre-assembled.
However, certain parts need to be assembled by the user.
4.3- Assembly
4.3.1- Wheels assembly
- Slide the wheels (9) in their axis on the support (Fig.2a)
- Secure wheels with the provided washers and screws (Fig.2b)
- Assemble the wheel cover (Fig.2c)
Publicité
