Publicité
8. Select
CYCLE*
NORMAL
COLDWASH-
--
WHITES
DEL_CATES
--
HEAVY
DUTY
QU_CK
WASH
TOWELS
DRAIN
SANITIZE
& SPIN
CLEAN WASHER
with
_$_
Turn cycle knob to select your wash cycle. See "Cycle Guide"
for details on cycle features.
9. Adjust
settings,
if desired*
The display will show the default settings for the selected
cycle. To adjust a setting, touch its name - Wash Temp, Spin,
Soil, or Presoak. Adjusting settings will change the Estimated
Time Remaining. Tightly packing the load, unbalanced
loads,
or excessive suds may also cause the washer to increase the
cycle time.
1 0. Select
any additional
options*
for_ut_,_Sr,_n J
To add an option to the cycle, touch its name - Clean Boost
with Steam, Extra Rinse, TumbleFresh, or Cycle Signal. To
remove an option from the selected cycle, touch the option
again.
1 1. Setting
a delayed
wash
If you do not want to begin a cycle immediately, you may
choose the DELAY WASH option. This will delay the start
of the wash cycle by up to 8 hours.
To set a delayed wash:
1. Touch DELAY WASH + and - buttons to set the desired
delay time.
2. Touch and hold START to set the delay. The delay
countdown
has started when the START light stops blinking.
*Not all options and settings are available with all cycles.
See "Cycle Guide" for available options and settings.
11
Publicité
