Publicité
Troubleshooting
If something doesn't work...
DANGER! Risk of injury! Improper repairs
can result in the product functioning
unsafely. This endangers yourself and your
environment.
Fault/malfunction
The product does not start up
Dust extraction unit is not working suf-
ficiently.
Too strong abrasion of the material to
be processed.
Not optimal surface quality.
Product is not sanding smoothly.
If you can't fix the fault yourself, contact your nearest
vendor. Please be aware that any improper repairs
will also invalidate the warranty and additional costs
may be incurred.
Disposal
Disposal of the appliance
A crossed-out wheelie bin icon means: Bat-
teries and rechargeable batteries, electrical
or electronic devices must not be disposed of
with household waste. They may contain
substances that are harmful to the environ-
ment and human health.
Consumers must dispose of waste electrical devices,
spent portable batteries and rechargeable batteries
separately from household waste at an official collec-
tion point to ensure that these items are processed
correctly. The product can be returned free of charge
in accordance with the legal requirements, for exam-
ple through a municipal waste disposal company or a
dealer.
Batteries, rechargeable batteries and lamps
that are not permanently installed in waste
electrical equipment and can be removed in
a non-destructive way must be removed and
disposed of separately before disposal of the equip-
ment. Lithium batteries and rechargeable battery
packs of all systems are only to be handed in to the
Malfunctions are often caused by minor faults. You
can easily remedy most of these yourself. Please
consult the following table before contacting the ven-
dor. You will save yourself a lot of trouble and possibly
money too.
Cause
Device on?
No current in product?
Filler material with high filler con-
tent, soft filler?
Hose clogged or bent?
Extraction effect set too low?
Speed too high?
Too coarse graining of the abra-
sive?
Suction effect too strong?
Wrong abrasive graining?
Drying time of filler not adhered to? Observe the technical data sheets
Filler material with high filler con-
tent, soft filler?
Placed onto the surface with the
machine running (scoring)?
Suction effect too strong?
Too hard filler or hard subsurface? Reduce speed (► P. 32).
waste collection points in a discharged state. The bat-
teries must always be protected against short circuits
by taping off the poles.
All end users are responsible for deleting any per-
sonal data stored on waste devices prior to their dis-
posal.
Disposal of the packaging
The packaging consists of cardboard and
correspondingly marked plastics that can
be recycled.
– Make these materials available for recy-
cling.
Technical data
Material number
Mains voltage
Rated output
Protection class
Idling speed
Dimensions of sanding plate
Sound power level (L
Sound pressure level (L
Vibration**
Weight
Remedy
Switch on the device.
Check mains cable, plug socket and
fuse.
Reduce the speed (► P. 32).
Remove the clogging or straighten
the bend.
Increase extraction effect (► P. 32).
Reduce speed (► P. 32).
Select finer graining.
Reduce suction effect (► P. 32).
Select appropriate graining.
and recommendations of the manu-
facturer.
Select finer graining.
Place the machine onto the material
before switching on.
Reduce suction effect (► P. 32).
380501
230 V~, 50 Hz
710 W
II
600–1500 min
ø215 mm
)*
98 dB(A)
WA
(K = 3 dB(A))
)*
87 dB(A)
PA
(K = 3 dB(A))
3,83 m/s²
(K = 1,5 m/s²)
3,9 kg
GB
-1
33
Publicité
