Publicité
• Please observe that the moving parts may also be
situated behind ventilation openings.
• This product contains a light source of energy effi-
ciency class <G>.
• Symbols appearing on your product must not be
removed or covered. Signs on the product that
are no longer legible must be replaced immedi-
ately.
Read and observe the instructions for use
before using the product for the first time.
Risk of damage to the eyes! Never look di-
rectly into the LED.
Dust extraction
Dusts from materials such as lead-containing paint,
some types of wood, minerals and metal may be
harmful to health. Touching of inhaling the dusts can
cause allergic reactions and/or ailments of the res-
piratory tract of the user or persons in the vicinity.
Certain dusts such as oak or beech dust are consid-
ered carcinogenic, particularly in combination with
wood treatment additives (chromate, wood preserva-
tives). Materials containing asbestos may only be
processed by experts.
– Always use a dust extraction facility.
– Make sure the workplace is well ventilated.
– Always wear a dust protection mask.
– Observe the regulations valid in your country for
the materials to be processed.
Risks caused by vibrations
CAUTION! Risk of injury due to vibra-
tions! Vibrations may, in particular for per-
sons with circulation problems, cause dam-
age to blood vessels and/or nerves.
If you notice any of the following symptoms,
stop working immediately and consult a doc-
tor. Numbness of body parts, loss of sense
of feeling, itching, pins and needles, pain,
changes in skin colour.
The vibration values specified in the technical data
represent the main uses of the device. The actual
existing vibrations during use may deviate from these
as a result of the following factors:
• Incorrect use of the product;
• Unsuitable tools inserted;
• Unsuitable material;
• Insufficient maintenance.
You can reduce the risks considerably by following
the tips below:
– Maintain the device in accordance with the
instructions in the operating instructions.
– Avoid working at low temperatures.
– When it is cold, make sure your body and your
hands, in particular, are kept warm.
– Take regular breaks and move your hands at the
same time to promote circulation.
Remaining risks
There will still be residual risks even when the device
is used according to the instructions and under obser-
vation of all of the safety notes in this set of operating
instructions:
• Damage to lungs if a suitable dust mask is not
worn.
• Damage to ears if suitable ear protection is not
worn.
• Harm to health caused by hand-arm vibration if
the device s used for a longer period or is used or
serviced incorrectly.
Personal protective equipment
Wear close-fitting work clothes
If you have long hair, wear a head covering.
Wear a dust mask when working in dusty en-
vironments.
Wear hearing protection.
Wear protective goggles.
Do not wear gloves near rotating machine
parts.
Your product at a glance
Note: The actual appearance of your prod-
uct may differ from the illustrations.
► P. 3, fig. 1
1. Revolution regulator
2. On-Off switch
3. Telescopic extension
4. LED
5. Lock for telescopic extension
6. Sanding plate
7. Locking hook
Scope of supply
• Drywall sander
• Suction hose
• Sanding discs (6×)
• Instructions for use
Assembly
Assembling the device
► P. 4, fig. 2
– Unfold the device as shown and secure with the
locking hook (7).
– Ensure that the locking hook (7) has clicked prop-
erly into place.
Attach the telescopic extension
► P. 4, fig. 3
– Insert the telescopic extension (3) as shown and
adjust to the required length.
– Tighten the lock (5) by hand.
Note: When assembling, ensure that the
handle of the device and the handle of the
telescopic extension both point in the same
direction.
GB
31
Publicité
