Publicité
GB
Check the safe condition of the product:
– Check whether there are any visible defects.
– Check whether all parts of the product are firmly
attached.
Operation instructions
Indicator Lights:
8. Mode:
• Normal/Natural/Sleeping
9. Timer indicator:
• 0.5h/1h/2h/4h
10. Speed:
• High-Medium-Low
11. Power indicator
12. Swing indicator
13. Mist indicator:
• Max.-Medium-Min
A. Mist button
– Press the [Mist] button to switch the ultrasonic
mist and off. Adjust the mist volume (Max-
medium-minimum) by pressing the [Mist] but-
ton several times.
– When the mist function is selected, the water
tank indicator light will be illuminated green.
– If the water tank is empty (or short of water), the
water indicator light will be illuminated red.
– The mist function and fan function can be
worked independently or together.
B. Timer button
– Press the [Timer] button when the fan is on.
The indicator will show the time remaining until
the fan is due to switch off. You can select the
length of time the fan will be in operation from
spans ranging from 0.5 to 7.5 hours in 0.5-hour
increments. Press the TIMER button repeat-
edly, and the sum of the values of the lights is
the remaining time until shut down.
C. On/Speed button
– Use the [ON/SPEED] button to switch the fan
ON.
– Set the fan speed from three options (High-
Medium-Low) by pressing the [ON/SPEED]
button several times.
D. Mode button
– The wind mode can be adjusted by pressing
the [MODE] button.
– Normal: The fan will operate in High, Medium or
Low mode as set.
– Natural: The fan will operate at low, medium
and high speeds in different patterns to provide
a wind flow that replicated natural airflow.
Fault/malfunction
Product not running.
If you can't fix the fault yourself, contact your nearest
vendor. Please be aware that any improper repairs
will also invalidate the warranty and additional costs
may be incurred.
20
E. Off button
F. Swing button
G. Remote control
Cleaning
– Always unplug the fan before cleaning it.
– Clean the water tank and water unit once a week
– If you do not intend to use the fan for an extended
– If the fan will be placed in storage for a more
– To avoid damaging the plastic and indicators, do
– In general, the mist fan does not require any
Troubleshooting
If something stops working...
Malfunctions are often caused by minor faults. You
can easily remedy most of these yourself. Please
consult the following table before contacting the ven-
dor. You will save yourself a lot of trouble and possibly
money too.
Cause
No mains voltage?
Cable faulty?
– Sleeping: Sleep mode can operate at low,
medium and high speeds. In sleep mode, the
wind speed will decrease in set patterns before
operating at a low speed until shut down.
– Press the [OFF] button to switch the fan off.
– When you press the [SWING] button, the mist
fan head will move continuously from side to
side. Pressing the button again will stop the
oscillation of the mist fan.
– You can adjust the wind angle up and down
manually.
– The above functions can be controlled using
the remote control by pressing the correspond-
ing function buttons. To use the remote control,
insert two AAA 1.5V batteries in the battery
housing in the remote control.
DANGER! Caution, risk of injury!
Always pull the mains plug out before
commencing any work on the product.
to prevent the formation of scale, algae, or bacte-
ria.
period, empty the water tank and dry the water
unit with a microfiber cloth.
extended period of time (over winter, etc), always
cover it with a suitable cover to prevent dust from
entering the device.
not use any abrasive cleaning agents or chemi-
cals.
maintenance. The fan must not be opened by
unauthorized persons.
DANGER! Risk of injury! Improper
repairs can result in the product function-
ing unsafely. This endangers yourself and
your environment.
Remedy
Check cable, plug, socket and fuse.
Contact your local vendor.
Publicité
