Publicité
MENU MAP
NO.?
MODE
1
Addr
2
Chnd
3
Slnd
4
Shnd
5
Auto
6
Sens
7
Led
8
dISP
9
Pan
10
Tilt
11
Ver
12
Rest
NOTE: For AUTO or SOUND operation, the device must be set to MASTER. Then select the desired
mode (SOUND# or AUTO#) and the speed/sensitivity. Once this has been confirmed, switch the de-
vice off and on again to operate in AUTO or SOUND mode.
CARE
Before cleaning the unit, disconnect it if from the mains. Do not use aggressive cleaning agents. Use a clean
cloth to wipe any dust or dirt from the product. We are not liable for damage arising from incorrect handing,
improper use or wear and tear. We reserve the right to make technical modifications.
SPECIFICATIONS
Input voltage ................................................................................................................... 110-240V~ 50/60Hz
Consumption ............................................................................................................................................ 40W
Light sources .................................................................................ASTRO : 1 x 10W RGBW LED 4-in-1 Osram
.............................................................................................................BEAM: 1x 10W RGBW 4-in-1 Cree LED
Dimensions ..................................................................................................................... 143 x 125 x 165mm
Weight .................................................................................................................................................... 1.5kg
6
MANUAL - MH-ASTRO-BEAM
DISPLAY
A001-A512
14CH-18CH
Mast-d512
sh1-sh4
Aut1-Aut4
SP1-SP9
1-100
On-Off
dISP
No-Yes
No-Yes
V10
©Copyright LOTRONIC 2024
FUNCTION DESCRIPTION
DMX channel mode
Choose number of channels
Master-Slave
Sound controlled mode
Auto effect
Auto effect speed
Sound sensitivity adjustment
Display switch
Display setting
Pan forward/Pan Reverse
Tilt forward/Tilt reverse
Version
Manual reset
Publicité
