Publicité
● Maintain power tools and accessories. Check for
EN
misalignment or binding of moving parts, breakage of
parts and any other condition that may affect the
power tool's operation. If damaged, have the power
SV
tool repaired before use. Many accidents are caused
by poorly maintained power tools.
NO
● Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
PL
● Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into
DE
account the working conditions and the work to be
performed. Use of the power tool for operations
different from those intended could result in a
FI
hazardous situation.
● Keep handles and grasping surfaces dry, clean and
free from oil and grease. Slippery handles and
FR
grasping surfaces do not allow for safe handling and
control of the tool in unexpected situations.
NL
2.7 Battery tool use and care
● Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type of
battery pack may create a risk of fire when used with
another battery pack.
● Use power tools only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
2.8 To minimized noise and vibration
exposure
● Plan the work so that exposure to heavy vibrations is
spread over a longer period.
● To reduce noise and vibrations when in use, limit the
time the tool is in use, and use low-power/vibration
mode and suitable safety equipment.
● Take the following precautions to minimise the risks of
exposure to vibrations and/or noise:
● Check that the tool is in good condition.
● Only use accessories that are in good condition, and
suitable for the job.
● Keep a firm grip on the handles/grips.
2.9 Impact wrench safety warning
Warning! Hold the power tool by the insulated
grips when you use it in areas where it can come into
contact with concealed electrical cables. Contact with
a live cable will cause the metal parts on the product to
also become live and can give the user an electric shock.
6
2.10 Additional safety instructions
● Loose work pieces must always be secured.
● Release the trigger immediately if the product
becomes blocked. Be prepared for high torque
reactions which cause kickback.
Note! The product can get blocked when it get jammed
in the workpiece or when it get overloaded.
● Always wait until the product has come to a complete
stop before you put it down. The product can jam and
cause you to lose control of the power tool.
● Hold the product correctly. When you tighten and
loosen screws be prepare for temporarily high torque
reactions.
● Use applicable detectors to find hidden pipes or
electric lines or refer to the local utility company for
aid.
2.11 Safety instructions for operation
● Read and obey the warning instructions before
operation.
● Do not use the product if you are tired, ill, or
intoxicated. This will decrease your vision, alertness,
coordination and judgement.
● Do not let children or persons who do not know the
product to use it.
● Do not use the product if it is damaged.
● Do not make changes to the product.
● Use the product only for its specified function.
● Wear ear protectors when you drill. Exposure to noise
can cause hearing loss.
2.11.1 Residual risks
There will always be residual risks even if you operate the
product in accordance to the instructions.
The following hazards may occur in connection with the
type and design of this power tool:
● Hearing damage if ear protection is not worn.
● Health injuries as a result from the effect of vibration
on the hands and arms when the product is used over
a long period of time or when it is not used and
maintained correctly.
● Danger due to electromagnetic field generated while
the machine is in operation. Under certain
circumstances, this field may negatively affect active
or passive medical implants.
Publicité
