Publicité
Table of contents
EN
1 Introduction
SV
1.1 The product .......................................................................4
1.2 Symbols ..............................................................................4
NO
1.3 Product overview ...........................................................4
2 Safety
PL
2.1 Safety definitions ...........................................................4
2.2 General power tool safety warnings ....................4
2.3 Work area safety .............................................................5
DE
2.4 Electrical safety ...............................................................5
2.5 Personal safety ................................................................5
FI
2.6 Power tool use and care .............................................5
2.7 Battery tool use and care ........................................6
FR
2.8 To minimized noise and vibration exposure .....6
2.9 Impact wrench safety warning ................................6
NL
2.10 Additional safety instructions .................................6
2.11 Safety instructions for operation ............................6
3 Operation
3.1 To attach and remove a battery ..............................7
3.2 Rotation selector ............................................................7
3.3 To attach an accessorie ..............................................7
3.4 To operate the product ................................................7
4 Storage
5 Maintenance
6 Discard
7 Servicing
8 Technical data
4
1
Introduction
1.1
The product
4
The product is a battery powered impact wrench that is a
part of the Meec Tools Multiseries 18 V. The battery and
battery charger are not included. Only for domestic use.
1.2
Symbols
4
Read the operating instructions carefully
and make sure that you understand the
instructions before you use the product.
Save the instructions for future reference.
This product complies with applicable EU
directives and regulations.
Recycle as electrical waste.
1.3
Product overview
Figure 1
7
1.
Anvil
2.
Rotation selector button /Trigger lock
3.
Belt clip
4.
Battery port
5.
Trigger
6.
LED work light
7
2
Safety
7
2.1
Safety definitions
7
Warning! If you do not obey these instructions,
7
there is a risk of death or injury.
8
Caution! If you do not obey these instructions,
there is a risk of damage to the product, other materials
or the adjacent area.
Note! Information that is necessary in a given situation.
2.2 General power tool safety
warnings
Warning! If you do not obey these instructions,
there is a risk of death or injury.
Warning! Read all safety warnings and all instruc-
tions. Failure to follow the warnings and instructions can
result in electric shock, fire and/or serious injury.
Publicité
