Teka 226683 PA1 Instructions De Montage Et D'utilisation page 31

Assembly instructions
Dimensions in mm
Cut-out according to the template
Bracket
• Insert the hob and align it.
• From the bottom, insert the brackets with screws in the holes
provided for fastening the brackets, align the brackets and
screw them tight.
• Tighten the screws with a hand screw driver only; do not use a
battery-operated screw driver.
• In the case of thin worktops make sure that the brackets are
correctly positioned.
Important:
There is a risk of breakage if the hob is canted or subjected to
stress during installation!
Minimum distance to adjacent walls
Opening dimensions
Outer dimensions of the hob
Cable routing in rear wall
Installation height
Cut-out according
to the template
GB
31