Stop Function; Keep-Warm Function - Teka 226683 PA1 Instructions De Montage Et D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 34
Operation
keep pressed
26

STOP function

The cooking process can be briefly interrupted with the STOP function, e.g. if
the doorbell rings. The STOP function must be released in order to continue
cooking at the same power level. If a timer has been set it will pause and will
then continue.
This function is only available for 10 minutes for reasons of safety. The hob
will then be switched off.
1. Pots and pans are on the cooking zones and the required power levels
have been set.
2. Press the STOP key
another instead of the cooking levels previously selected.
3. The interruption is ended by firstly pressing the STOP key
pressing any other key (except the ON/OFF key).
The second key must be pressed within 10 seconds, otherwise the hob
will switch off.

Keep-warm function

With the keep-warm function
keep food warm. The respective cooking zone is operated at a low power
level.
1. Cookware is placed on a cooking zone and a power level (e.g. 3) is
selected.
The stand-by dot of the cooking zone selected must light up. It may be
necessary to press a cooking zone selection key (e.g.
2. Keep the Minus key
( ... 3, 2, 1,
). The setting will stop at
have been activated.
3. Press the Minus key
The keep-warm function is available for 120 minutes, after which the hob will
be switched off.
. The letters S-T-O-P will be shown one after
you can use one of the cooking zones to
pressed to switch the power settings down
and the warming function will
once to de-activate the function (0).
GB
and then
for front left).

Publicité

Table des Matières
loading

Table des Matières