Publicité
cord from the mains, re-connect the controller and then
connect the supply cord to the mains.
• lf "E" still appears, please check whether the controller is
covered and becomes too hot.
• If so, please disconnect the mains plug from the outlet,
wait until the controller cools down and then try again.
• lf "E" still appears, the overheat protection system might
have been activated. Please contact our customer
service.
CLEANING
• Disconnect the appliance from the mains and allow it to
cool before undertaking any cleaning task.
• Clean the electrical equipment and the mains connection
with a damp cloth and dry. DO NOT IMMERSE IN
WATER OR ANY OTHER LIQUID.
• Do not use solvents, or products with an acid or base pH
such as bleach, or abrasive products, for cleaning the
appliance.
• The heating pad may be washed by hand or machine-
washed at a temperature of up to 40ºC. Remove the
control before washing. The control must never be
immersed in water.
• Dry the product immediately after any cleaning task
making sure that the appliance inlet is perfectly dry.
This symbol means that the user must
consult instructions thoroughly before use.
Do not insert pins.
Do not use folded or rucked.
Not to be used by very young children
(0 – 3 years).
Maximum washing temperature 40ºC,
normal process
Do not use bleach.
Do not iron.
Hand wash.
Do not dry clean.
Do not tumble dry.
Publicité
