Publicité
EN
English (Original instructions)
HEATING PAD
BREMEN DIGITAL
BREMEN DIGITAL+
BREMEN DIGITAL SOFT
BREMEN DIGITAL SOFT+
DESCRIPTION
A
Heating pad
B
Supply cord
C
Supply cord connector
D
Heating pad connector
E
Cover *
F
Control unit
1. Display
2. Increase temperature button
3. Decrease temperature button
4. Increase time button
5. Decrease time button
6. On/Off button
(*) Only available in the models Bremen Digital Soft/
Bremen Digital Soft+.
If the model of your appliance does not have the
accessories described above, they can also be bought
separately from the Technical Assistance Service.
USE AND CARE
• Fully extend the appliance's supply cord before each use.
• Do not use the appliance if the on/off button does not
work.
• Disconnect the appliance from the mains when not in use
and before undertaking any cleaning task.
• Never leave the appliance connected and unattended if
is not in use. This saves energy and prolongs the life of
the appliance.
INSTRUCTIONS FOR USE
BEFORE USE
• Make sure that all product's packaging has been
removed.
• Please read carefully the "Safety advice and warnings"
booklet before first use
USE
• Spread the heating pad out fully, making sure it's not
folded or creased.
• Extend the supply cord completely before plugging it in.
• Ensure that the supply cord connector is properly
attached to the appliance.
• Connect the appliance to the mains.
• The display will show a red dot.
• Turn the appliance on, by using the on/off button.
• In the display will blink a line during ten seconds.
• Press any button except the on/off button within 10
seconds to switch on the product. If don't press any
button during this period, the appliance will return to
standby mode
• Use the increase and decrease temperature buttons to
select the temperature level (1,2,3,4,5,6,7,8,9,H).
TIMER FUNCTION
• The appliance's operating time can be controlled.
• To program the operating time simply select it using the
increase and decrease time buttons (10 to 90 minutes).
• Each press increases 10 minutes.
• After the selected time, the appliance will switch off
automatically.
STAND-BY FUNCTION
• In order to save energy, if timer is not set the appliance
passes to stand-by after 30 minutes if the user does not
press any button.
• To return to normal operation simply press the appliance's
on/off button.
ONCE YOU HAVE FINISHED USING THE APPLIANCE
• Turn the appliance off using the on/off button.
• Unplug the appliance from the mains.
• Clean the appliance.
SAFETY THERMAL PROTECTOR
• The appliance has a safety device, which protects the
appliance from overheating.
• If the appliance turns itself off and does not switch itself
on again, disconnect it from the mains supply, and wait
for approximately 15 minutes before reconnecting. If the
machine does not start again seek authorised technical
assistance.
SPECIAL MESSAGES
• If "E" or other symbols indicating incorrect operation
appear on the screen when using the product, it means
there is a problem with the controller.
• Please check whether the controller is tightly connected
to the product. If not, please disconnect the supply
Publicité
