Publicité
TROUBLESHOOTING
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or
electrical shock.
PROBLEM
If the oven fails to start
If the problem cannot be
corrected
If the wrong temperature unit is
displayed
Upper cooking elements visibly
glow, but bottom cooking
elements do not
If "E1 or E2" flashes on the
display and a chime sounds
If "PF" is shown on the display
16
WARNING
Electrical Shock Hazard
Check to see if the oven is plugged into a grounded 3
prong outlet.
Check to see if the fuse in the circuit breaker box to the
oven is in working order.
See the "Warranty and Service" sections.
Do not return the Air Fryer to the retailer – retailers do not
provide service.
Press and hold the Convection button for 3 seconds
to switch between Fahrenheit (°F) and Celsius (°C)
temperature units.
The upper cooking elements use higher power for better
browning performance. The lower cooking elements
are on, but may not visibly glow like the upper cooking
elements. This is normal and your Air Fryer is working
properly.
The NTC Sensor may not be working. This issue can not
be corrected. Please see the "Warranty and Service"
sections.
The oven will display "PF" when it is turned on for the
first time or has experienced a power failure. If a cooking
function was in process, dispose of food: it might not be
thoroughly cooked. The code will disappear when the
knob is turned or by pressing the start button.
SOLUTION
Publicité
