Publicité
Automatic time limitation
If the element is used for prolonged periods of time
without changes in the settings being made, the
automatic time limitation function is triggered.
Basic settings
The appliance has various basic settings. You can adjust
these settings to the way you usually cook.
Display
Function
Automatic child lock/panel lock
™‚
Off*
‹
‚
On
Audible signals
™ƒ
‹
Confirmation signal and error signals deactivated
Only error signals activated
‚
Only confirmation signals activated
ƒ
All signals activated*
„
™†
Automatic timer
Off*
‹
‚
-
ŠŠ
Length of timer end signal
™‡
10 seconds*
‚
30 seconds
ƒ
1 minute
„
Power Management function
™ˆ
= Off*
‹
‚
= 1.000 W. minimum power
.= 1.500 W
‚
= 2.000 W
ƒ
etc.
or
Š
Selection time for heating element
™Š
Unlimited*: You can adjust the settings of the last heating element used at any time without hav-
‹
ing to select it again.
Restricted: You can adjust the settings for the last heating element used within 10 seconds after
‚
selecting it. After that you will have to reselect the heating element before setting it.
Cookware, Checking result of cooking process
™‚ƒ
Not suitable
‹
Not perfect
‚
ƒ
Suitable
Reset to basic settings
™‹
Off*
‹
Reset the appliance to basic settings
‚
*factory settings
--------
Automatic shut-off time
. = maximum power of the element
Š
The element stops heating.
indicator
/
flash alternately in the display.
•
œ
The indicator goes out when any symbol is pressed. The
element can now be reset.
When the automatic time limitation is activated depends
on the selected heat level (from 1 to 10 hours).
and the residual heat
"‰
15
Publicité
