ECOVACS WINBOT W2 PRO Manuel D'utilisation page 13

2.3 Ready for Cleaning
Start Cleaning
1
1. Connect power and press and hold
2. Place WINBOT's bottom close to the glass. WINBOT will automatically
attach itself and start cleaning.
* Do not place WINBOT too close to the edge of the window. It is
recommended to keep a distance of at least 10cm from the edge of the
window.
* WINBOT is only suitable for flat surfaces without gaps.
* After the fan is started, do not bring small objects such as hair close to
the fan to prevent them from being sucked in and blocking the fan.
* Before cleaning, please observe the area to attach WINBOT for any small
particles. If there are any, please remove them or switch to a particle-free
area to avoid scratching the glass.
2
on WINBOT for 2 seconds.
Maintenance during Cleaning
2
For heavily stained glass, wash or replace the Wiping Pad multiple
times and clean the four Spherical Sensors in time.
* Clean the Wiping Pad in time and make sure that any small particles
on it are completely removed to avoid scratching the glass.
13 EN