ECOVACS WINBOT W2 PRO Manuel D'utilisation page 10

Quick Start
Connect Compound Cable, Power Adapter and Plug
1
Ensure battery is fully charged before use. Charging time will be approx. 4 hours.
Do not disconnect power when WINBOT is running, otherwise it may pose a risk of falling.
Connect correctly in the order shown above. Improper connection may cause charging abnormalities or damage to the battery.
Fill up the Water Tank
2
It is recommended to use with ECOVACS WINBOT Cleaning Solution. The maximum volume of the Water Tank is about 60 ml, and a full tank can
sustain spraying for about 60 minutes. In Fast Cleaning mode, a full tank can cover an area of approximately 30 ㎡ .
Use ECOVACS WINBOT Cleaning Solution for better cleaning performance.
* If ECOVACS WINBOT Cleaning Solution is used up, use tap water as a
temporary substitute.
To avoid product damage, do not use any cleaning solution other than the
dedicated ECOVACS WINBOT Cleaning Solution.
Do not use distilled water or filtered water.
EN 10
Step1
Step2
Maximum: 60ml