Table Des Matières; Important Safety Instructions; Safety Guidelines - Definitions - Delta 40-695 Manuel D'utilisation

IMPORTANT SAFETY INSTRUCTIONS .....................2
SAFETY gUIdELINES - dEFINITIONS ......................2
gENERAL SAFETY RULES ........................................3
AddITIONAL SPECIFIC SAFETY RULES ...................4
FUNCTIONAL dESCRIPTION ......................................6
CARTON CONTENTS ....................................................6
ASSEMBLY ..................................................................7
OPERATION ................................................................9
using tools or equipment, basic safety precautions should always be followed to reduce the risk of
personal injury. Improper operation, maintenance or modification of tools or equipment could result
in serious injury and property damage. There are certain applications for which tools and equipment
are designed. This product should NOT be modified and/or used for any application other than for which it was
designed.
If you have any questions relative to its application DO NOT use the product until you have written DELTA
Equipment Corporation and we have advised you. Contact us online at www.DeltaMachinery.com or by mail at Technical
Service Manager, DELTA
Information regarding the safe and proper operation of this tool is available from the following sources:
• Power Tool Institute, 1300 Sumner Avenue, Cleveland, OH 44115-2851or online at www.powertoolinstitute.com
• National Safety Council, 1121 Spring Lake Drive, Itasca, IL 60143-3201
• A merican National Standards Institute, 25 West 43rd Street, 4 floor, New York, NY 10036 www.ansi.org - ANSI 01.1
Safety Requirements for Woodworking Machines
• U.S. Department of Labor regulations www.osha.gov
It is important for you to read and understand this manual. The information it contains relates to protecting YOUR
SAFETY and PREVENTING PROBLEMS. The symbols below are used to help you recognize this information.
indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
i ndicates a potentially haz a rd o us situation which, if not avoided, may result in minor or mod er ate injury.
indicates a practice not related to personal injury which, if not avoided, may result in property
NOTICE
damage.
fr
AVIS
sp AVISO
Some dust created by power sanding, sawing, grinding, drilling, and other construction activities
contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.
Some examples of these chemicals are:
• Lead from lead-based paints,
• Crystalline silica from bricks and cement and other masonry products, and
• A rsenic and chromium from chemically-treated lumber (CCA).
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to
these chemicals: work in a well-ventilated area, and work with approved safety equipment, such as those dust masks
that are specially designed to filter out microscopic particles.
TABLE OF CONTENTS

IMPORTANT SAFETY INSTRUCTIONS

Read all warnings and operating instructions before using any tool or equipment. When
Power Equipment Corporation, 4825 Highway 45 North, Jackson, TN 38305.
®

SAFETY gUIdELINES - dEFINITIONS

TROUBLESHOOTINg ...................................................11
MAINTENANCE .............................................................11
SERVICE .........................................................................11
ACCESSORIES ..............................................................12
WARRANTY ...................................................................12
FRANÇAIS ......................................................................13
ESPAÑOL .......................................................................24
SAVE THESE INSTRUCTIONS!
2
Power
®