Publicité
Assembly
Warning! Before assembly, make sure that the appliance is
switched off and unplugged.
Use
Warning! Do not leave the appliance unattended while it is
connected to the power supply and during the cool down
period.
•
Connect plug to outlet and turn temperature dial to your
desired setting, which is dependant on the fabric of the
garment .
•
The indicator light (8) will be illuminated. Refer
'IRONING TIPS' in this manual.
•
Once soleplate has reached its preset temperature, the
indicator light will turn off, then you can begin ironing.
Warning! Do not touch the hot soleplate at any time before
cooling down!
Ironing tips
•
Always check first whether a label with ironing
instructions is attached to the article.
•
Follow these ironing instructions in any case.
•
The iron heats up quicker than it cools down, therefore,
you should start ironing articles requiring the lowest
temperature, such as those made of synthetic fibre.
•
If the fabric consists of various kinds of fibres, you must
always select the lowest ironing temperature to iron the
composition of those fibres.
•
Silk and other fabrics that are likely to become 'shiny'
should be ironed on the inner side.
•
To prevent staining do not spray water straight on silk or
other delicate fabrics.
•
Velvet and other textures that rapidly become shiny
should be ironed in one direction with light pressure
applied. Always keep the iron moving at all times.
Note: when ironing woolen fabrics, shining of the fabric may
occur. So it is suggested that you should turn the article
inside out and iron the reverse side.
Cleaning and maintenance & storage
Warning! Before cleaning and maintenance, switch the
appliance off and remove the plug from the socket.
Warning! Do not immerse the appliance or the cord set or
the plug in water or any other liquid.
•
Wipe the exterior with a damp cloth.
•
Do not use scouring pads.
•
If necessary, use a mild detergent to remove spots. Do
not use any abrasive or solvent based cleaner. Do not
use chemical based de-scaling agents.
•
Store your appliance in a cool dry area.
(Original instructions)
Mains plug replacement
If a new mains plug needs to be fitted:
•
Safely dispose of the old plug.
•
Connect the brown lead to the live terminal of the new
plug.
•
Connect the blue lead to the neutral terminal.
•
If the product is class l (earthed), connect the green /
yellow lead to the earth terminal.
Warning! If your product is class ll double insulated (only 2
wires in the cord set), no connection is to be made to the
earth terminal.
Follow the fitting instructions supplied with good quality plugs.
Any replacement fuse must be of the same rating as the
original fuse supplied with the product.
Technical data
Voltage/supply
Power consumption
Weight
Protecting the environment
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black+Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with other household waste. Make this product
available for separate collection.
•
Black+Decker provides a facility for recycling
Black+Decker products once they have reached the end
of their working life. This service is provided free of
charge. To take advantage of this service please return
your product to any authorised repair agent who will
collect them on our behalf.
•
You can check the location of your nearest authorised
repair agent by contacting your local Black+Decker
office at the address indicated in this manual.
Alternatively, a list of authorized Black+Decker repair
agents and full details of our after-sales service and
contact are available on the Internet at:
www.2helpU.com.
ENGLISH
F550
V
220 - 240
AC
W
1100 - 1200
kg
2.6
5
Publicité
