Publicité
All manuals and user guides at all-guides.com
ASSEMBLY INSTRUCTIONS
STEP 1 (this step will require two people)
Take the treadmill and the parts from the carton. Take the right upright post and
connect the wire on the bottom of the post with the wire in the bracket at the front
right of the machine. After connecting the wires, slide the right upright post into the
right bracket. Make sure not to pinch the wires. Take the left upright post and place it
in the left bracket. Secure the posts with 4 pcs of M10x20 - bolts that go on the back of
the upright posts, 4 pcs M10x40 - bolts that go in the bottom 2 holes on each post, and
2pcs M10x50x20 bolts that go in the top hole on each post. Leave them hand tight.
Left Upright Post
Right Upright Post
16
Publicité
