Publicité
Measure
®
Initio
2 pressure meter
Ref : 251 181
The parameter settings are complete, the displayed magnitude is now the pressure with
symbol P and its unit is hPa.
4.2 Jack
The 3.5mm jack is used for example to connect the Initio 2 to a Groomy
181 000). The output voltage varies between 0 and 5V. We have:
5. WIFI communication
The WIFI module (ref 451 470) is used to display Initio
5.1 Installing the WIFI module
The WIFI module is installed when the Initio
5.2 Display on tablet
Once the WIFI module has been installed, the tablet has to be configured :
Information about the module is displayed on the screen.
ENGLISH
-
Fill in the customisation tab as follows:
-
Click on the diskette to save the parameter settings
-
0 hPa corresponds to 0V
-
2000 hPa corresponds to 5V
®
-
Raise the Initio
2 stand
-
Remove the back by sliding it downwards
-
Put the WIFI module into place, replacing the back
-
Push the module all the way into place until it click fits. It must be possible to retract
the stand without forcing.
-
Press the « Menu » button (4)
-
Select Parameters
-
Select Network
-
On the tablet, choose the name of the WIFI network displayed on the Initio
-
Open an internet browser
-
Enter the address displayed by the Initio
®
2 data, for example on a tablet.
®
2 is switched off.
®
2 in the browser address bar.
12
®
interface (ref
®
2.
Publicité
