Measure
®
Initio
2 pressure meter
Ref : 251 181
1. Description
The Initio
2000 hPa. It can also save and store data, and restore them later onto a computer.
A WIFI module (ref 451 470) is also available to display and save the measurement on a
tablet or a PC equipped with WIFI.
The Initio
interface with direct inputs through banana connectors or a Groomy
jack.
Sensor input (8)
On/Off button (1)
Return button (2)
Knob/OK (6)
2. Use
It is recommended that the Initio
first time. This should be done using the USB charger (7) delivered in a separate package.
In general, it is recommended that complete charge/discharge cycles should be carried out
(wait until the instrument is fully discharged before completely recharging it).
2.1 Start up
The measurement is displayed directly on the instrument screen.
ENGLISH
®
2 pressure meter is an instrument that measures pressures between 200 and
®
2 pressure meter is fitted with an analogue output and can be used with an ExAO
-
Press the power on button (1) on the left side of the instrument.
-
To switch the Initio 2 off, do a short press on the power on button (1) and validate
pressing the knob (3).
Menu button (4)
®
2 battery should be fully recharged when it is used for the
9
®
interface using the
Banana
analogue
outputs (5)
Jack analogue
output (6)
USB connector (7)