Publicité
EN
26
1. Press and hold the ON/OFF button for more than 1.5 seconds to switch to
5+2 programming mode. The 5 in the middle of the first row will begin to
flash. Short press the ▼ or ▲ to adjust this to 2.
2. Press and hold ▲ for more than 1.5 seconds until the number 1 on the
right of the first row begins to flash. Short press the ▲ to adjust the +1,
short press the ▼ to decrease the number. (figure below)
Note: If group 4 is selected directly, the group 1-3 is no longer set.
3. Press and hold ▲ again for more than 1.5 seconds until the ON time
flashes and increase or decrease this to the hour you would like. Short
press the ▼ to adjust the minutes. (figure below)
4. Repeat the above steps to set the OFF time.
5. Press and hold ▲ for more than 1.5 seconds to set the temperature (the
factory setting is 20 °C) and the third line will begin to flash. Use button ▼
and ▲ to set the set temperature. (see figure below)
6. Press and hold ▲ again for more than 1.5 seconds to set the ON/OFF
times of the next time slots. Please follow the above steps to set groups
2/3/4.
set temperature
Publicité
