Publicité
OVERVIEW AND GETTING STARTED
Control panel
•
The screen displays the room temperature and the target temperature,
the date & time, Working mode etc.
•
The touch screen displays during mode selection, flexible programming,
temperature adjustment, and time setting.
•
The product has four working modes: heating normally via set
temperature, 5+2 weeks timing mode, and 1-7 weeks timing mode.
•
The temperature sensor in the bottom of the device reads the room
temperature and signals when to turn the towel rail on/off as the ambient
temperature rises. When the set temperature is 1 °C higher than room
temperature, the device turns on heating and the flame light lights up.
When the set temperature is 1 °C lower than room temperature, the
heater turns off and the flame lamp goes out.
Start up
1. Check if the power cord is intact.
2. Check if the power supply voltage is consistent. (The power socket is
required to have a grounding terminal and good grounding performance.)
3. Check that the plug of the mains cable matches the socket and that the
socket can withstand the minimum circuit requirements. If not, it cannot
be used to prevent accidents.
LCD screen
UP
ON/OFF
DOWN
EN
23
Publicité
