Publicité
°C/°F Display
Press and hold button ▲ and ▼ for more than 1.5 seconds simultaneously to
display the temperature in Celsius or Fahrenheit.
set
temperature
Heating normally open modeShort press the ON/OFF button to turn the
device on and enter the normal heating mode.
Use button ▼ and ▲ to set the set temperature. Short press ▼ and ▲ to
adjust the temperature either up or down. After 8 seconds the device will
automatically save the setting if no other buttons are pressed.
Tips:
3. The default temperature in the display appears as "T 20C". "C" means that
the unit is operating in Celsius display.
4. When the set temperature is higher than the room temperature, the
heating symbol
5. When pressing the ON/OFF button in the heating process, this will turn
the heater off. Press the ON/OFF button again and the unit will turn back
on.
5+2 Programming Mode
You can program the heater to fit your needs – week and weekend, plus up to 4
timeslots per day.
will be showing and the flame light lights up.
heating on mode
display
room
temperature
heating symbol
5+2 programming mode display
turn-on time
end time
EN
25
Publicité
