Publicité
Adding a cards group in ZONE 1
After going into programming:
Press buttons
and . The LED indicator will flash
yellow. Press buttons
Then enter three-digits from 000 to 999 to identify
the number of the membership group, followed
by the 3-digit number to indicate the quantity of
cards you want to add to the group. For example:
the figures "005 060" indicate that the cards will
be added from the storage unit 005 onwards and
that the total number of cards is 60.
After entering the desired digits, a beep will sound;
swipe the first additional card, a beep will sound
to indicate that the card has been added correctly.
Press button
to exit programming mode.
Note: when entered in sequence, the cards must
be numbered in order (0011, 0012, 0013, etc.).
DISPOSAL
Do not litter the environment with packaging
material: make sure it is disposed of according to
the regulations in force in the country where the
product is used.
When the equipment reaches the end of its life
cycle, avoid discarding it in the environment. The
equipment must be disposed of in compliance
with the regulations in force, recycling its com-
ponent parts wherever possible. Components that
qualify as recyclable waste feature the relevant
symbol and material's abbreviation.
8
and
. A beep sounds.
Publicité
