Publicité
C
General Notes
• Read the instructions carefully before beginning
the installation and carry out the actions as
specified by the maker;
• The installation, programming, commissioning
and maintenance of the product must be car-
ried out only by qualified technical personnel,
correctly trained with regard to respecting the
regulations in force, including the implementation
of accident prevention measures and the disposal
of packaging;
• Before carrying out any cleaning or maintenance
operation, disconnect the device from the power
supply;
• The equipment must be destined solely for the use
for which it was expressly designed.
• The manufacturer declines all liability for any
damage as a result of improper, incorrect or
unreasonable use.
Installation - ACMR-VR – ACMR-P C
1. Open the device by removing the case screw with
the screwdriver provided.
4
2. Use the drilling template provided to position
the device accurately and drill the required holes.
3. Use the screws provided to mount the back case
onto the wall. Be sure to take out the cables
through the hole in the centre.
4. Carefully connect the system cables B.
5. Reclose the device.
OPERATION - ACMR-VR – ACMR-P
The ZONE 1 and 2 relays can be programmed to
open the door.
ZONE 1 can be programmed in 3 different modes:
• access with card
• access with card or code
• combined access (card + code).
ZONE 2 can also be programmed to activate a bell.
Entering Programming Mode
1. Admin default code is 1234.
2. Enter the admin default code twice (1234+1234).
Note:
• If the admin default code you set is two digits,
please input 12 12
• If the admin default code you set is three digits,
please input 123 123 etc...
Publicité
