Publicité
H. ChildLock function
I.
DrinksChill function
3.2 Switching on/off
Switching on
1. Connect the mains plug to the power
socket.
2. Press ON/OFF if the display is off. The
temperature indicators show the set
default temperature.
If "dEMo" appears on the display, refer to
"Troubleshooting" .
Switching off
1. Press ON/OFF for 3 sec.
The display switches off.
2. Disconnect the mains plug from the
power socket.
3.3 Temperature regulation
Set the temperature of the appliance by
pressing the temperature regulators.
Recommended set temperature is:
• +4°C for the fridge
• -18°C for the freezer
The temperature range may vary between
-16°C and -22°C for freezer and between 2°C
and 8°C for fridge.
The temperature indicators show the set
temperature.
The set temperature will be reached
within 24 hours.
After a power failure the set temperature
remains stored.
3.4 FastCool function
FastCool function allows to chill large amount
of warm food rapidly to avoid warming food
already stored in the fridge.
1. Press the Mode until the corresponding
icon appears.
The FastCool indicator flashes.
2. Press the OK to confirm.
The FastCool indicator appears. When the
FastCool function is on, the fan may work
automatically.
8
ENGLISH
J. DYNAMICAIR function
This function stops automatically after
approx. 6 hour.
To deactivate the function before it
automatically ends, repeat the procedure or
select a different fridge set temperature.
3.5 FastFreeze function
The FastFreeze function is used to pre-freeze
and fast freeze in sequence in the freezer
compartment. This function accelerates the
freezing of fresh food and protects foodstuffs
already stored from warming.
To freeze fresh food activate the function
at least 24 h before placing the food to
complete pre-freezing.
1. Press Mode button until the FastFreeze
indicator blinks to activate this function.
2. Press the OK button to confirm.
The FastFreeze indicator lights up.
This function stops automatically after 52 h.
Repeat the procedure or select different
temperature to deactivate the function.
3.6 DYNAMICAIR function
The fan activates automatically when needed.
You can also switch on the fan manually.
To switch on the function:
1. Press the Mode button until the
corresponding icon appears.
The DYNAMICAIR indicator flashes.
2. Press the OK button to confirm.
The DYNAMICAIR indicator appears.
To switch off the function repeat the
procedure until the DYNAMICAIR indicator
turns off.
If the function is activated automatically
the DYNAMICAIR indicator does not
appear (refer to "DYNAMICAIR" section
in "Daily use").
The activation of the function increases
the energy consumption.
Publicité
