Publicité
EMISSION CONTROL INFORMATION
EMISSION CONTROL INFORMATION
To protect the environment in which we all live, BAD BOY has incorporated an exhaust emission control system.
EXHAUST AND EVAPORATIVE EMISSION CONTROL SYSTEM
The system reduces the amount of pollutants discharged into the atmosphere by the exhaust of this engine. The fuel tank, ignition
and exhaust systems of this engine have been carefully designed and constructed to ensure an efficient engine with low exhaust
pollutant and low evaporate emission levels. If you purchased your (Blower, Trimmer, Hedge Trimmer) in the state of California,
the fuel tank includes low evaporative emission system.
MAINTENANCE AND WARRANTY
Proper maintenance is necessary to ensure that your engine will continue to have low emission levels. This Owner's/Operator's
Manual contains those maintenance recommendations for your engine. Those items identified by the Periodic Maintenance Chart
are necessary to ensure compliance with the applicable standards. As the owner of the (Blower, Trimmer, Hedge Trimmer), you
have the responsibility to make sure that the recommended maintenance is carried out according to the instructions in this
Owner's/Operator's Manual at your own expense. The BAD BOY Limited Emission Control System Warranty requires that you
return your (Blower, Trimmer, Hedge Trimmer) to an authorized BAD BOY (Blower, Trimmer, Hedge Trimmer) dealer for remedy
under warranty. Please read the warranty carefully, and keep it valid by complying with the owner's obligations it contains.
TAMPERING WITH EMISSION CONTROL SYSTEM PROHIBITED
Federal law and California State law prohibit the following acts or the causing there of:
(1) the removal or rendering inoperative by any person other than for purposes of maintenance, repair, or replacement, of any
device or element of design incorporated into any new engine for the purposes of emission control prior to its sale or delivery to
the ultimate purchaser or while it is in use, or (2) the use of the engine after such device or element of design has been removed
or rendered inoperative by any person.
Among those acts presumed to constitute tampering are acts listed below: Do not tamper with the original emission related parts.
• Carburetor and internal parts
• Spark plug
• Magneto or electronic ignition system
• Fuel filter
• Muffler or any internal portion of the muffler
• Air cleaner element
• Fuel Tank
Model
Dimensions L x W x H
Dry Weight
Engine Displacement
Ignition System
Carburetor
Fuel Tank Capacity
Gas to Oil Ratio
Spark Plug
Spark plug Gap
SPECIFICATIONS
14.4 x 19.1 x 21.3 in. (365 x 485 x 540 mm)
English-14
BB880
21.0lbs (9.5 kg)
60.9 cm
3
Solid state
Diaphragm Type
0.55gal (2.1 L)
50:1
NGK BPM8Y
.024 -.028 in. (0.6 - 0.7 mm)
Publicité
