Bosch GGS 30 LS Professional Notice Originale page 15

Intended Use
The power tool is intended for grinding and deburring metal
with corundum grinding tools, as well as for working with
sanding belt tools.
The power tool is additionally intended for brushing and pol-
ishing metal.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Collet
(2) Clamping nut
(3) Grinding spindle
Technical Data
Die grinder
Article number
Rated power input
Power output
Rated speed
Speed adjustment range
Max. collet diameter
Spanner flat on the
– Clamping nut
– Grinding spindle
Spindle collar diameter
Grinding tool diameter, max
Max. inner shank dimension L
0
Max. shank length
Constant electronic control
Speed preselection
KickBack Control
Restart protection
Soft start
A)
Weight
Protection class
A) Weight without mains connection cable and without mains plug
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
Values can vary depending on the product, scope of application and environmental conditions. To find out more, visit
www.bosch-professional.com/wac.
Noise/Vibration Information
Noise emission values determined according
to EN 60745-2-23.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 80 dB(A); Sound power level
91 dB(A). Uncertainty K = 3 dB.
Wear hearing protection!
Total vibration values a (triax vector sum) and uncertainty K
h
determined according to EN 60745-2-23:
Bosch Power Tools
(4) Spindle collar (insulated gripping surface)
(5) On/off switch (GGS 30 LS)
(6) Speed preselection thumbwheel
(7) Handle (insulated gripping surface)
(8) Open-ended spanner on the grinding spindle
(9) Open-ended spanner on the clamping nut
(10) Inner shank dimension L
(11) On/off switch (GGS 30 LPS)
(12) Lock-off function for on/off switch (GGS 30 LPS)
(13) Spindle lock
a) This accessory is not part of the standard scope of delivery.
GGS 30 LS
3 601 BB5 0..
W
W
−1
min
−1
min 7000–33000
mm
mm
mm
mm
mm
mm
mm
kg
Surface grinding (roughing with grinding tool diameter of
25 mm):
2
a = 6.6 m/s , K = 1.5 m/s
h
Surface grinding (roughing with grinding tool diameter of
50 mm):
2
a = 13.4 m/s , K = 1.5 m/s
h
The vibration level given in these instructions has been
measured in accordance with a standardised measuring pro-
cedure and may be used to compare power tools. It can also
English | 15
0
GGS 30 LPS
3 601 BB5 2..
750
400
33000
7000–33000
8
17
15
43
50
10
35
●
●
●
●
●
1.7
/ II
2
2
1 609 92A 9LY | (11.06.2024)
a)
a)
750
400
33000
8
17
15
43
50
10
35
●
●
●
●
●
1.8
/ II