Dimensions; Wiring Example - schmersal SD-I-DP-V0-2 Instructions De Montage Et De Câblage

Montage- und Anschlussanleitung / PROFIBUS-Gateway für serielle Diagnose
Mounting and wiring instructions / PROFIBUS gateway for serial diagnostics
Instructions de montage et de câblage / Passerelle PROFIBUS pour diagnostic série
Technical data
english
PROFIBUS interface:
PROFIBUS protocol:
Data transfer rate:
GSD file:
Power supply:
Current consumption at 24 VDC:
Operating temperature:
Storage temperature:
Ambient conditions:
Protection class:
Resistance to vibrations:
Resistance to shocks:
Electromagnetic immunity:
EN 61000-4-2 (ESD)
EN 61000-4-3
EN 61000-4-4 (Burst)
EN 61000-4-5 (Surge)
EN 61000-4-6
Electromagnetic interfering radiation:
Interfering radiation industrial environments 37 dBµV/m
Rated insulation voltage U
Rated impulse withstand voltage U
Overvoltage category:
Degree of pollution:

Dimensions

Wiring example

Sensor
X1 (IN)
X2 (IN)
SD-OUT
9-pole SUB-D connector with default PROFIBUS connection (DP-A, DP-B, +5 V, GND)
DP-V0
9600 Baud ... 12 MBaud
KAS_0b13.GSD
24 VDC –15 % / +20 % (stabilised PELV)
typically 180 mA, max. 250 mA, internally protected with 0.5 A PolySwitch
– 5 °C ... + 55 °C, in case of vertical positioning
– 25 °C ... + 85 °C
humidity 5 % ... 95 %, no condensation
IP 10
5 ... 9 Hz / 3,5 mm (to IEC 60068-2-6),
9 ... 150 Hz / 1g
15 g / 11 ms (to IEC 60068-2-27)
to EN 61000-6-2 (2002)
4 kV / 8 kV
10 V/m / 80 % AM
2 kV DC supply / 1 kV PROFIBUS and SD-Interface
500 V DC supply / 1 kV PROFIBUS and SD-Interface
10 V / 80 % AM
to EN 61000-6-4 (2002)
: 32 V
i
: 0,5 kV
imp
II
2
PROFIBUS
PB
SD
T
ON
50
Sensor
Y1 (OUT) X1 (IN) Y1 (OUT)
Y2 (OUT) X2 (IN) Y2 (OUT)
SD-IN SD-OUT SD-IN
72
Sensor
X1 (IN) Y1 (OUT)
Safety
Sicherheits-
monitoring
Auswertung
X2 (IN) Y2 (OUT)
module
SD-Interface
PROFIBUS-
SD-OUT SD-IN
Gateway
SD-I - DP-VO-2
SD-I-DP-V0-2
PROFIBUS DP
SPS/PLC
10 / 16