Publicité
8 | English
Material
– Paint
– Varnish
– Filler
– Bodyfiller
Expert for Wood
– All wood and wood-based ma-
terials (e.g. hardwood, soft-
wood, chipboard, construction
boards)
Best for Wood
– Hardwood
– Chipboard
– Construction boards
– Metal materials
– Car paint
– Stone
– Marble
– Granite
– Ceramic
– Glass
– Perspex
– Fibreglass reinforced plastics
Changing the sanding sheet (see figure A)
To remove the sanding sheet (6), lift it from the side and pull
it from the sanding pad (3).
Remove dirt and dust from the sanding pad (3), e.g. with a
paintbrush, before attaching a new sanding sheet.
The surface of the sanding pad (3) is fitted with a hook-and-
loop fastening, allowing sanding sheets with a hook-and-loop
backing to be secured quickly and easily.
Press the sanding sheet (6) firmly onto the underside of the
sanding pad (3).
To ensure optimum dust extraction, make sure that the
punched holes in the sanding sheet (6) are aligned with the
drilled holes in the sanding pad (3).
Selection of the Sanding Pad
The power tool can be fitted with sanding pad of various
hardnesses, depending on the application:
– Soft sanding pad: Suitable for sensitive sanding even on
curved surfaces
– Medium-hard sanding pad: Suitable for all sanding work,
universal application
1 609 92A 8DB | (17.05.2023)
Application
For sanding down paint
For sanding undercoats (e.g. removing brush-
strokes, paint drips and paint runs)
For final sanding of primers prior to painting
For pre-sanding, e.g. of rough and uneven
beams and boards
For surface sanding and levelling of slight irreg-
ularities
For finish-sanding and fine sanding of wood
For pre-sanding
For shaping and edge chamfering
For fine sanding during shaping
Buffing and edge rounding
– Hard sanding pad: Suitable for heavy sanding on flat sur-
faces
Changing the Sanding Pad (see figure B)
Note: Replace damaged sanding pads (3) immediately.
Pull off the sanding sheet. Unscrew the four screws
completely (7) and remove the sanding pad (3). Attach the
new sanding pad (3) and retighten the screws.
Note: When attaching the sanding pad, make sure that the
teeth of the catch mate with the recesses in the sanding pad.
Note: Damaged sanding pad holders (8) must only be re-
placed by an after-sales service centre authorised to work
with Bosch power tools.
Dust/Chip Extraction
The dust from materials such as lead paint, some types of
wood, minerals and metal can be harmful to human health.
Touching or breathing in this dust can trigger allergic reac-
tions and/or cause respiratory illnesses in the user or in
people in the near vicinity.
Certain dusts, such as oak or beech dust, are classified as
carcinogenic, especially in conjunction with wood treatment
Grit
Coarse
40
60
Medium
80
100
120
Fine
180
240
320
400
Coarse
40
60
Medium
80
100
120
Fine
180
240
320
400
Coarse
80
Medium
100
120
Fine
180
240
320
400
Very fine
600
1200
Bosch Power Tools
Publicité
